If you are someone who just loves a fresh pot of coffee, you are likely not the kind of person who likes their grounds already ground when you buy it at your Coffee Maker with Grinder shop or local grocery store. You are one of those people who knows that in order to get the freshest coffee you can possibly get, you are going to want coffee that is being ground just as you are making the pot. The good news is that there are plenty of clean coffee makers with grinder out there on the market these days. The bad news is that these devices are going to be a bit more work to clean up than your more traditional equipment.
You might think that there really shouldn't be that much work because you're still just working with a device that is shooting grounds through the housing and those grounds are being washed through the housing by the hot water. The fact of the matter is that the grinder can cause extra problems you might not think about until you are really getting in there and starting the cleaning process. There are some special steps you are going to want to take in order to make sure that your device is plenty cleared out and cleaned out. Not making sure of that can lead to mild and other problems that are eventually going to leave your maker something that will sit unused or flat out broken.
The first thing you are going to want to do is to open the lid of the reservoir and take out the grinder basket. You are also going to want to open the filter basket and remove the entire filter from this basket. You are also going to want to remove the reservoir lid entirely from the machine so you can get all of those components well cleaned.
Fill your sink with warm water that has enough soap that it is sudsy, but not overflowing with soap bubbles. You are looking to wash your machine but you aren't giving it a bubble bath. There is something to be said about being economical with soap because there is less of a chance that you are going to have problems with soap residue. Put all of the components that are able to be removed into the water and first let them soak. You can then gently wipe them with a sponge, but be gentle. There shouldn't be any reason to scrub and scrubbing action could lead to problems with the filter screens.
Use a damp, but not wet dishcloth in order to wipe down the device. You are going to want to wipe down the inside of the machine as well as the outside. The reason you are going to want to make sure that you are only using a damp cloth, as opposed to a wet cloth, is because you don't want water splashing onto the motor. If the motor gets too wet, it's going to be something that makes the motor stop running the way you would like. You are going to want to make sure that you are wiping underneath where the grinder basket sits. This will make sure that the spot that can get the dirtiest is going to be the place that gets the most attention when you are cleaning up your mess.
Pull the carafe out of the device and wash it down using some nice sudsy water again and a sponge or rag. You're going to want to be able to really get in there and wash the inside of the carafe, especially if you have gone a little while before you washed it. Even if you are making sure that there isn't a lot of residues left behind after each pot of the Coffee Maker with Grinder, there is likely going to be something left behind. Even if you aren't having issues with mild or other residues, your Coffee Maker with Grinder is going to taste different if you aren't thoroughly washing your carafe.
The point is that you are able to have a couple of different benefits from making sure the carafe is well washed. After it's been thoroughly scrubbed down and washed, make sure you dry it thoroughly and set it aside. Much like the other parts that you've washed, you can certainly put the carafe through the dishwasher and have it go through the minimal effort, should you have a dishwasher available.
Wipe the spot where your carafe sits on the machine with a dishcloth. If there are Coffee Maker with Grinder stains, you can use a little bit of soap in order to get rid of them. Make sure this spot is nice and dry before you put the carafe back on there and you want to use the machine again.
The final step is to calcify the coffee maker with grinder is running one part white vinegar and two parts cold water through the process you would normally use to Coffee Maker with Grinder. Then discard the vinegar mixture and run an entire carafe worth of water through the machine.